Navigate Festo products categories to see available series of products
1. Valves and valve manifolds
(back to index)▲
1.1 Electrically actuated valves
(back to valves and valve manifolds index)▲
1.1.1 Universal directional control valves
Universal valves | Compact 10/14/18mm wide | 10mm wide | 14mm wide | 18mm wide | 24mm wide | Sub-base semi inline mounting | Armature guide tube principle Tiger 2000 |
Poppet valves Tiger Classic |
Directly actuated poppet valve | Exchangeable electrical actuation | High-corrosion resistance, easy to clean | Replacement valve for valve manifold assembly or mounting on sub-base |
Brass design diaphragm valve for gaseous media | Fully assembled and tested valve terminal | High-performance valve terminal | Easy valve replacement | |||||||
1.1.2 Standards-based directional control valves
ISO 15407-1 ISO 15218 |
ISO 15407-2 ISO 5599-2 |
ISO 5599-1 | CNOMO | ||||||||||||||
1.1.3 Application-specific directional control valves
4ms switching time | 2ms switching time | Outdoor, oil and gas, chemical applications | Redundant construction, safe reversing of a hazardous movement | Plastic valves | Very compact 10/12/25mm wide |
Clean design | Control cabinet installation | ||||
1.1.4 Solenoid-actuated process and media valves
Extensive pressure range, no pressure differential required |
Reverse jet pulse valves | High-flow rate | Gaseous and liquid media | Cast brass or stainless steel design |
|
1.2 Pneumatically actuated valves
(back to valves and valve manifolds index)▲
Universal valves | Compact valves 10/14/18mm wide |
midi pneumatics | All metal, poppet valves Tiger Classic |
Tiger 2000 | Poppet valves Tiger Classic |
Angle seat valves, Stainless steel |
Angle seat valves, extremely high-flow |
Ball valve with actuators | Ball valve actuators, NAMUR | Pinch valves | Poppet valves, brass design |
ISO 15407-1 ISO 15218 ISO 5599-1 |
ISO 5599-1 |
For control cabinet installation | |
1.3 Mechanical & hand operated valves
(back to valves and valve manifolds index)▲
1.3.1 Mechanically operated valves
Roller levers | Pin plungers | Spring whiskers | Tongue-operated (door switches) | Ball valves without actuator | |||||||||||||
1.3.2 Hand operated valves
1.4 Flow control valves
(back to valves and valve manifolds index)▲
Polymer, metal or stainless steel design |
In-line installation | Roller lever actuation | Precision adjustment for low and medium speed | Combination of throttle check valves and piloted non-return valves | Precision one-way valves | Needle valves | Needle valves with muffler | ||||||
1.5 Stop valves / Non-return valves
(back to valves and valve manifolds index)▲
Piloted non-return valves | Piloted non-return valves, high-flow rate | Non-return valves with connecting thread at both ends | Quick exhaust valves | Quick exhaust valves, reduced noise emission |
Vacuum security valves | On-off valves | Ball valves | Hand slide valves | |||
1.6 Shut off valves and soft-start dump valves
(back to valves and valve manifolds index)▲
Shut-off valves | Soft-start valves | ||||||||||||
1.7 Proportional valves & Piezo valves
(back to valves and valve manifolds index)▲
Flow regulation | Pressure regulation | ||||||
1.8 Manifolds & Sub-bases
(back to valves and valve manifolds index)▲
2. Cylinders & Actuators
(back to index)▲
2.1 Pneumatic cylinders
(back to cylinders & actuators index)▲
2.1.1 Double acting
ISO 21287 50% less installation space |
ISO 15552 Clean design |
ISO 15552 Standard profile with 2 sensor slots |
ISO 15552 Comprehensive range of mounting accessories |
ISO 15552 Sturdy tie rod design |
ISO 6432 Round cylinders |
Round cylinders Stainless steel |
Compact air cylinders | Secured against twisting by guide rod and yoke plate | Square piston rods | Standard hole pattern | Short-stroke cylinder | Flat designs | Extremely flat design, protected against rotation |
Hinge cylinders | Multi-mount | |
2.1.2 Single acting
ISO 21287 Minimal fitting space |
ISO 6432 Pushing series |
Square piston rod, Pushing series | Square piston rod, Pulling series | Micro cylinders | Short-stroke cylinders | Multi-mount | |||
2.2 Rotary actuators
(back to cylinders & actuators index)▲
Swivel actuator units | Rotary vane actuators | Rotary vane actuators with angular displacement encoder | Rotary vane actuators, lighter version | Semi-rotary actuators | Twin-piston rotary actuators | Quarter-turn actuators | Handling module series | Pick and place machine series | Electric rotary actuators with stepper motor and built-in gearbox | Electric rotary actuators with toothed belt | Front unit series electric rotary actuators | ||
2.3 Electric linear actuators
(back to cylinders & actuators index)▲
Electric actuators with spindle drive | Linear actuators with permanently attached motor | Electric mini slides | Electric slides | Electric linear axis cylinders | Electric linear axis actuators | Electric linear axis actuators, Ready-to-install unit |
Cantilever linear actuators | Electric gantry axis | Electric linear actuators with configurable lifting movement | ||
2.4 Grippers
(back to cylinders & actuators index)▲
Angled grippers, micro series |
Angled grippers | Bellow grippers | Bernoulli grippers | Electric parallel grippers | Grippers jaw blank | Parallel grippers | Parallel grippers, heavy duty |
Parallel grippers with long stroke | Parallel grippers with max. repetition accuracy | Parallel grippers, micro series |
Parallel grippers, high-precision |
Parallel grippers, for harsh environment |
Radial grippers | Radial grippers, for heavier loads applications |
Swivel/Gripper units | 3-point grippers | 3-point grippers, for harsh environment |
3-point grippers, heavy duty |
|
2.5 Vacuum technology
(back to cylinders & actuators index)▲
Suction cups with connector | Suction cups without connector | Suction cups with fixed connecting thread | Electric vacuum generators | Compact vacuum generators, light weight | Compact vacuum generators | Compact vacuum generators with built-in solenoid shut-off valve | High-vacuum generator cartridges | ||
2.6 Stopper cylinders
(back to cylinders & actuators index)▲
Stopper cylinders, Compact design |
Stopper cylinders with flange mounting | Stopper cylinders with toggle lever | Electric stopper cylinders | |
2.7 Pneumatic linear actuators
(back to cylinders & actuators index)▲
Extremely flat design | Shortest mini slide on the market | Mini slide | Smallest guided slide unit on the market | Guided actuators | Mini guided actuators for minimal space | Mini slide, flat design | Twin cylinders with one end plate | Twin cylinders with through piston rods and two end plates | High-resistance guided actuators | Feed separators with plunger | |||
3. Compressed air treatment and air preparation units
(back to index)▲
3.1 Pre-assembled air preparation service combination units
(back to compressed air treatment and air preparation units index)▲
Predefined or freely configurable maintenance device combinations 40mm width MS series |
Predefined or freely configurable maintenance device combinations 62mm width MS series |
Energy efficiency modules 62mm width MS series |
Air preparation combination units with air line lubricator D series |
Air preparation unit combination units without air line lubricator D series |
||||||
MSB4 |
MSB4N |
MSB6 |
MSB6N |
MSE6 |
FRC |
FRC |
FRC |
LFR |
LFR |
3.2 Air preparation individual components for assembly
(back to compressed air treatment and air preparation units index)▲
3.3 Other air preparation components
(back to compressed air treatment and air preparation units index)▲
4. Fittings & Tubings
(back to index)▲
5. Servo drives and servo motors
(back to index)▲
6. Automation sensors
(back to index)▲