iAutomation | Beyond Automation

iAutomation | Beyond Automation

Added to Cart

iAutomation | Beyond Automation

Categories

Click here to filter products by technical characteristics(+)

Bimba
M4V310-10-24VDC
5/2-way electrically-actuated single solenoid piloted pneumatic directional control valve (Cv 1.68) - internal pilot air supply - Bimba / MFD (M4V series - model 300) - 24Vdc solenoid control - 11mm DIN connector + 3 x 3/8" NPT threaded female ports (I...
Contact for availability
1. Pneumatic systems
2. Pneumatic valves
3. Pneumatic valves (electrically actuated)
Bimba
D-2485-A-4
Non-repairable air reservoir with Aluminium end caps - Bimba (Air reservoir series) - 4" length - 2" bore (B2")
Contact for availability
1. Pneumatic systems
Bimba
PM-MC-09
Mounting clamp - Bimba - for 1-1/16" bore (1-1/16") / for 1-1/2" bore (1-1/2")
Contact for availability
1. Pneumatic systems
Bimba
LTV-15
5/2-way mechanically-actuated pneumatic directional control valve (Cv 0.24) with lever / roller - Bimba / Mead (LTV series) - 0.16" / 4.06mm full open actuation stroke length - 5 x 1/8" NPT threaded female ports - Pneumatic spring reset - Rated for 25....
Contact for availability
1. Pneumatic systems
2. Pneumatic valves
3. Pneumatic valves (mechanically actuated)
Bimba
EFCL-4043-3EM
Twist-clamp double-acting cyl. (linear + 90° rotary motion) with counterclockwise (left) rotation + magnetic position sensing - Bimba (Twist-clamp EFCL series) - 1-1/2" bore (B1-1/2") - 1.69" total stroke (S1.69") / 1.1" rotary stroke (S1.1") / 0.59" c...
Contact for availability
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic clamps
Bimba
QE10-5G5
Quick-exhaust pneumatic right angle valve (Cv 0.2) - Bimba (Quick exhaust series) - 2 x M5 threaded pneumatic ports (IN; EXH) + 2 x M5 pneumatic ports (OUT) (adjustable) - Rated for 0...+125psi operating pressure - equivalent to #QE105G5
Contact for availability
1. Pneumatic systems
2. Pneumatic valves
Bimba
C4X-S
M8 straight female shielded cordset/cable with 5m length - Bimba - IP67
Contact for availability
1. Pneumatic systems
Bimba
ERB1/4-10
Reducing bushing with 9/16" external HEX - Bimba / Pneumadyne (Pneu-Edge ERB series) - 1/4" NPT threaded (male) pneumatic connection + #10-32 UNF threaded (female) pneumatic connection - Nickel-plated brass - Straight - equivalent to ERB1410
Contact for availability
1. Pneumatic systems
2. Pneumatic fittings
Bimba
KLC-230
Pneumatic air timer delay signal - Normally Closed (NC) - Bimba (KLC series) - 2 x 1/8" NPT threaded pilot ports - Rated for 50...+150 (NC) / 40...+150 (NO) psi operating pressure - with 2...30s delay time - 11/64 clearance holes - equivalent to #KLC230
Contact for availability
1. Pneumatic systems
Bimba
D-9846-A
Single-acting (spring-return) hole punch cylinder with no cutter - Bimba (Original line Hole punch series) - 3/4" bore (B3/4") - 1" stroke (S1") - 1/4-28 (male) threaded rod + 1/2-20 threaded (mounting) - 1/8" NPT threaded pneumatic port - Carbon steel...
Contact for availability
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic cylinders
Bimba
MA-375X0.25-SR-RO
Single-acting (spring-return) adjustable location miniature air cylinder - Bimba (Miniature air cylinder series) - 3/8" bore (B3/8") - 1/4" stroke (S1/4") - #8-32 (male) threaded rod + 1/2-32 threaded rod (body) - #10-32 rear tapped pneumatic port (rea...
Contact for availability
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic cylinders
Bimba
AC312-SS
Stainless steel alignment coupler with 375lb max. pull at yield - Bimba (AC series) - 5/16-24 (male) threaded rod
Contact for availability
1. Pneumatic systems
Bimba
ISF-T1-010
Pneumatic straight connector fitting - Bimba (IntelliSense series) - 1 inlet + 2 outlets (threaded + push-in design) - #10-32 UNF threaded (female) pneumatic connection + 2 x 10mm push-in connectors - Nickel-plated brass - Straight - equivalent to ISFT...
Contact for availability
1. Pneumatic systems
2. Pneumatic fittings
Bimba
K-B-ET-16
Basic repair kit for cyl. - Bimba (Metric Extruded Linear Thruster series) - for 16mm bore (B16mm) - contains piston seals + rod seal + rod guide seal
Contact for availability
1. Pneumatic systems
Bimba
MSX
Magnetic field / cyl. position sensor/switch with LED indic. - auto-configure - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 144" / 3.66m pigtail terminated with bare end flying leads - ...
Contact for availability
1. Automation components
2. Sensors
3. Position sensors
Bimba
MRS-ABQ
Magnetic reed position track switch / sensor with LED indicator - Bimba (Heavy-duty MRS series) - Pre-wired with 6" / 0.15m pigtail terminated with M8 male connector electrical connection - Reed 2-wire LED indicator track-mounting Normally Open (NO) sw...
Contact for availability
1. Pneumatic systems
Bimba
932QN-SABP5-060-0188
Normally Open (NO) pneumatically-actuated shelving pinch valve with extended manual override btn. - for washdown applications - Bimba / Acro ("900" series) - 1.2" / 30.5mm tub. slot - 0.06" / 6/100" / 1.52mm pinch gap - 0.188" / 4.78mm pinch cylind. st...
Contact for availability
1. Pneumatic systems
2. Pneumatic valves
3. Pneumatic valves (pneumatically actuated)
Bimba
BRHL-011.25-D
Double-acting low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder - Rear block mounted series) - 250psi max. - 7/16" bore (B7/16") - 1-1/4" stroke (S1-1/4") - Rear block mounting for vertical positioning - #10-32 UNF-2A (male) thr...
Contact for availability
1. Liquid and hydraulic systems
2. Hydraulic actuators
3. Hydraulic cylinders
Bimba
H-090.011-DBZ
Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/16" bore (B1-1/16") - 0.011" stroke (S0.011") - Front block mounting - 5/16-24 UNF-2A (male) threaded rod + 4 x holes drill & counterbored...
Contact for availability
1. Liquid and hydraulic systems
2. Hydraulic actuators
3. Hydraulic cylinders
Bimba
EA-LB30
Pneumatic 90° adjustable L-shaped elbow connector fitting with 5/16" external HEX - Bimba / Pneumadyne (Pneu-Edge EA-L series) - 1 inlet + 1 outlet (threaded + barbed design) - #10-32 UNF threaded (male) pneumatic connection + 1/8" barbed connector - N...
Contact for availability
1. Pneumatic systems
2. Pneumatic fittings
Bimba
ETB30
Pneumatic fixed T-shaped connector fitting with 5/16" external HEX - Bimba / Pneumadyne (Pneu-Edge ETB series) - 1 inlet + 2 outlets (threaded + barbed design) - #10-32 UNF threaded (male) pneumatic connection + 2 x 1/8" barbed connectors - Nickel-plat...
Contact for availability
1. Pneumatic systems
2. Pneumatic fittings
Bimba
SBF-062-1/4
Pneumatic straight connector fitting with 1/4" external HEX - Bimba / Pneumadyne (SBF series) - 1 inlet + 1 outlet (threaded + barbed design) - #10-32 UNF threaded (male) pneumatic connection + 1/16" barbed connector - Nickel-plated brass - Straight - ...
Contact for availability
1. Pneumatic systems
2. Pneumatic fittings
Bimba
STT-10
Pneumatic adjustable T-shaped connector fitting with slotted screw + 5/16" external HEX - Bimba / Pneumadyne (STT series) - 1 inlet + 2 outlets (threaded design) - #10-32 UNF threaded (male) pneumatic connection + 2 x #10-32 UNF threaded (female) pneum...
Contact for availability
1. Pneumatic systems
2. Pneumatic fittings
Bimba
PB125-1032
Pneumatic straight connector fitting with 5/16" external HEX - Bimba / Pneumadyne (PB series) - 1 inlet + 1 outlet (threaded + push-in design) - #10-32 UNF threaded (male) pneumatic connection + 1/8" push-in connector - Nickel-plated brass - Straight -...
Contact for availability
1. Pneumatic systems
2. Pneumatic fittings
Bimba
PLS156-1/8-316
Pneumatic 90° swivel L-shaped elbow connector fitting with 11mm external HEX - Bimba / Pneumadyne (PLS series) - 1 inlet + 1 outlet (threaded + push-in design) - 1/8" NPT threaded (male) pneumatic connection + 5/32" push-in connector - 316L stainless s...
Contact for availability
1. Pneumatic systems
2. Pneumatic fittings