iAutomation | Beyond Automation

iAutomation | Beyond Automation

Added to Cart

iAutomation | Beyond Automation

Categories

Click here to filter products by technical characteristics(+)

Fabco-Air
PSD1-0.125
Double-acting pneumatic tie-rod cylinder actuator with single rod - Fabco-Air (Pancake II standard series) - 1/2" (B1/2") bore - 1/8" (S1/8") stroke - #8-32 UNC-2B female threaded rod-end - 2 x #10-32 UNF-2B threaded pneumatic ports - rated for -25...+...
Contact for availability
$54.30
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic cylinders
Fabco-Air
A-5-X-F
Double-acting pneumatic cylinder actuator with single rod - Fabco-Air (Pancake original series) - 1/2" (B1/2") bore - 1/16" (S1/16") stroke - #8-32 UNC-2B female threaded rod-end - 2 x #10-32 UNF-2B threaded pneumatic ports - rated for -25...+250°F / -...
Contact for availability
$54.65
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic cylinders
Fabco-Air
SND2-0.375-X0.25
Double-acting pneumatic cylinder actuator with twin rods + 1/4" extra rod extension - non-rotating rod - Fabco-Air (Square Pancake II series) - 3/4" (B3/4") bore - 3/8" (S3/8") stroke - #10-32 UNF-2B female threaded twin rod-ends - 2 x #10-32 UNF-2B th...
Contact for availability
$101.95
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic cylinders
Fabco-Air
FDF10X20
Double-acting pneumatic linear guided slide actuator with twin rod + adjustable retract stroke + magnetic piston + rubber bumpers (both ends) - Fabco-Air (FDF series) - 10mm (B10mm) bore - 20mm (S20mm) stroke - 4 x M3 x 0.5 (female) tapped holes on end...
Contact for availability
$87.15
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic slides
Fabco-Air
SPG100-J1-E20-A
Double-acting pneumatic parallel gripper with face-mounted electronic package (without sw.) - center locating dowel - Fabco-Air (SPG standard stroke series) - 1/4" (open) stroke - 4-40 UNC-2B (female) tapped holes - 2 x #10-32 UNF-2B threaded pneumatic...
Contact for availability
$496.20
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic grippers
Fabco-Air
SC12X10R
90° pneumatic swing clamp with single side clamping (with adjusting bolt) + magnetic piston - swing clockwise when retracting - 80°...100° swivel angle - Fabco-Air (Swing clamp cylinders SC series) - 12mm (B12mm) bore - 7.5mm swing stroke / 10mm straig...
Contact for availability
$124.80
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic clamps
Fabco-Air
FRA16X90
Double-acting pneumatic rotary actuator with rack-and-pinion design + magnetic piston - Fabco-Air (FRA series) - 16mm (B16mm) bore - 90° angular stroke - rated for 0.48Nm (at 5bar) torque - 2 x 1/8" NPT threaded pneumatic ports - rated for +14...+158°F...
Contact for availability
$137.30
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic rotary actuators
Fabco-Air
EZ1000-1.0-MH1-S000-RT00N0
Double-acting pneumatic linear guided slide actuator with 1" guide shaft(s) + rear toolbar - Fabco-Air (EZ series) - 2-1/2" (B2-1/2") bore - 1" (S1") stroke - 4 x 1/2-13 UNC-2B (female) tapped thru holes - 2 x 1/4" NPT threaded pneumatic ports - hard-c...
Contact for availability
$1,275.45
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic slides
Fabco-Air
F-0313D01-00I
Double-acting pneumatic cylinder actuator with single rod - Fabco-Air (F series) - 5/16" (B5/16") bore - 1/2" (S1/2") stroke - 5-40 UNC-2A male threaded rod-end - 2 x #10-32 UNF-2B threaded pneumatic ports - rated for -10...+165°F / -23...+74°C ambient...
Contact for availability
$21.48
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic cylinders
Fabco-Air
FAE12X25
Double-acting pneumatic cylinder actuator with single rod + rubber cushion + magnetic piston - Fabco-Air (FAE series) - 12mm (B12mm) bore - 25mm (S25mm) stroke - M6 x 1 male threaded rod-end - 2 x M5 threaded pneumatic ports - rated for +14...+158°F / ...
Contact for availability
$31.25
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic cylinders
Fabco-Air
FAQ2R125X200
Double-acting pneumatic cylinder actuator with single rod + adjustable cushions (both ends) + magnetic piston - Fabco-Air (FAQ2R series) - 125mm (B125mm) bore - 200mm (S200mm) stroke - M27 x 2 male threaded rod-end - 2 x G1/2" (1/2" BSPP) threaded pneu...
Contact for availability
$472.45
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic cylinders
Fabco-Air
FCQN-11-15F1-01I
Double-acting pneumatic NFPA tie-rod cylinder actuator with single rod + adjustable air cushion (both ends) + magnetic piston - Fabco-Air (FCQN OEM-NFPA series) - 1-1/2" (B1-1/2") bore - 1-1/2" (S1-1/2") stroke - 7/16-20 UNF-2A male threaded rod-end - ...
Contact for availability
$127.60
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic cylinders
Fabco-Air
FDF10X10
Double-acting pneumatic linear guided slide actuator with twin rod + adjustable retract stroke + magnetic piston + rubber bumpers (both ends) - Fabco-Air (FDF series) - 10mm (B10mm) bore - 10mm (S10mm) stroke - 4 x M3 x 0.5 (female) tapped holes on end...
Contact for availability
$82.95
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic slides
Fabco-Air
FDH10X10
Double-acting pneumatic linear guided slide actuator with top toolplate and front toolbar + magnetic piston + rubber bumpers (both ends) - Fabco-Air (FDH series) - 10mm (B10mm) bore - 10mm (S10mm) stroke - 8 x M4 x 0.7 (female) tapped holes - 6 x M5 th...
Contact for availability
$226.45
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic slides
Fabco-Air
FDXSL10X20
Double-acting pneumatic linear guided slide actuator with twin rods + adjustable retract stroke (0-5mm) + ball bearing + magnetic piston + rubber bumpers (both ends) - Fabco-Air (FDXS series) - 10mm (B10mm) bore - 20mm (S20mm) stroke - M4 x 0.7 female ...
Contact for availability
$110.05
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic slides
Fabco-Air
FGML12X20
Double-acting pneumatic cylinder actuator with triple rod + sleeve bearing + magnetic piston - top and side porting - non-rotating rod - Fabco-Air (FGM series) - 12mm (B12mm) bore - 20mm (S20mm) stroke - 4 x M5 threaded pneumatic ports - rated for +15....
Contact for availability
$123.45
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic cylinders
Fabco-Air
FGXS12X100
Double-acting pneumatic linear guided slide actuator with dual pistons + magnetic pistons - Fabco-Air (FGXS series) - 12mm (B12mm) bore - 100mm (S100mm) stroke - 2 x M5 x 0.8 (female) threaded mechanical ports - 2 x M5 threaded pneumatic ports - rated ...
Contact for availability
$425.80
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic slides
Fabco-Air
FGYB10X150
Double-acting rodless pneumatic cylinder actuator with rubber bumpers - magnetically coupled rodless - Fabco-Air (FGYB series) - 10mm (B10mm) bore - 150mm (S150mm) stroke - 2 x M5 threaded pneumatic ports - rated for +14...+140°F / -10...+60°C ambient ...
Contact for availability
$128.40
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic cylinders
Fabco-Air
FGYR15X100
Double-acting rodless pneumatic cylinder actuator with rubber bumpers - magnetically coupled rodless - Fabco-Air (FGYR series) - 15mm (B15mm) bore - 100mm (S100mm) stroke - 4 x M5 threaded pneumatic ports - rated for +14...+140°F / -10...+60°C ambient ...
Contact for availability
$210.25
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic cylinders
Fabco-Air
FGYSR10X250
Double-acting pneumatic linear guided slide actuator - magnetically coupled rodless - Fabco-Air (FGYSR series) - 10mm (B10mm) bore - 250mm (S250mm) stroke - 4 x M4 x 0.7 (female) threaded mechanical connection - 2 x M5 threaded pneumatic ports - 50-400...
Contact for availability
$218.55
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic slides
Fabco-Air
FJU16X25
Double-acting pneumatic cylinder actuator with single rod - Fabco-Air (FJU series) - 16mm (B16mm) bore - 25mm (S25mm) stroke - M5 x 0.8 male threaded rod-end - 2 x M5 threaded pneumatic ports - rated for +14...+158°F / -10...+70°C ambient - rectangular...
Contact for availability
$31.15
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic cylinders
Fabco-Air
FJUK16X15
Double-acting pneumatic cylinder actuator with single rod - non-rotating rod - Fabco-Air (FJUK series) - 16mm (B16mm) bore - 15mm (S15mm) stroke - M5 x 0.8 male threaded rod-end - 2 x M5 threaded pneumatic ports - rated for +14...+158°F / -10...+70°C a...
Contact for availability
$42.20
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic cylinders
Fabco-Air
FKA-10
Double-acting pneumatic angular gripper with magnetic piston and sw. mounting slots - -10°...+30° total jaw motion - Fabco-Air (FKA series) - 10mm (B10mm) bore - 4 x M3 x 0.5 (female) tapped holes - 2 x M3 threaded pneumatic ports - rated for +14...+15...
Contact for availability
$143.40
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic grippers
Fabco-Air
FKHC-10D
Double-acting pneumatic angular gripper with adjustable needle vlv. for jaw speed control + magnetic piston and sw. mounting slots - -10°...+30° total jaw motion - Fabco-Air (FKHC series) - 10mm (B10mm) bore - 4 x M2.5 x 0.45 (female) tapped holes - 2 ...
Contact for availability
$140.70
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic grippers
Fabco-Air
FKHL-10D1
Double-acting pneumatic parallel gripper with rack-and-pinion design + dual piston + built-in rod scraper + magnetic piston and sw. mounting slots - Fabco-Air (FKHL series) - 10mm (B10mm) bore - 40mm (S40mm) stroke - 4 x M5 x 0.8 male threaded rod-ends...
Contact for availability
$220.25
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic grippers